When was the last time the roof of your building was inspected? If it’s been awhile, the roof could have problems lurking that need immediate attention. Some roof problems cause obvious signs such as for example leaks, while some produce subtle signs that are only detectable at first glance. In either case, leaving the problems unaddressed can cost you thousands once you finally repair them. If the roof on your building has the problems listed below, an organization that specializes in commercial roofing should repair them quickly:

Buckled Panels

Roof panels buckle because of weather damage and poor installation. Whatever the cause, the buckling allows wind to blow underneath the panels, making them loose. Because the problem worsens, the panels begin to fall off, often coming off in large sections whenever a storm hits. Buckled panels are perhaps one of the most commonly fixed problems by companies that perform roof repair.

Expended Screw Holes

Expanded screw holes are another problem for panel roofs. As time passes, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that contain the panels in place. This creates a space where water can leak within the panels and soak the roof deck. Once Soft wash roof cleaning near me becomes saturated, the problem is costly to fix.

Blistering

Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose a problem, large ones can rupture and allow water to seep beneath the bitumen. Once the blisters form, hot weather typically makes them worse. As a result of humid subtropical climate in some regions of the country, commercial roofing frequently experiences blistering.

Ponding Water

Blocked drains and improper sloping can cause water to assemble in small ponds on a roof. Repairing a blocked drain is simple, but fixing a sloping problem is more complex. Often, installing a taper insulation system to establish a new slope is best solution. Through the rainy season, resolving ponding water is one of the most common types of roof repair.

Loose Flashing

Flashing prevents water from seeping in the crevice where in fact the roof abuts to protrusions such as for example chimneys and vents. Over time, most flashing should be resealed. If it is not, leaks may cause serious damage the deck and building interior. Most flashing problems are corrected during scheduled maintenance.

Missing Mortar

Chimneys and high elements of brick walls that have sections of missing mortar may cause leaks. These leaks tend to be mistaken for leaks in the roof membrane, but a thorough inspection by a company that focuses on commercial roofing will reveal the true problem. Most sections of missing mortar could be repaired with basic tuck pointing procedures.

Conclusion

The problems above are some of the most common reasons for roof repair. If they are corrected early, most problems are inexpensive to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the better way to ensure problems are detected early.